Plastics processors and packaging makers run trials constantly: new resins, recycled content, thinner walls, new molds and new barrier structures. That work can earn the federal research credit. The costs of trial runs and tooling need careful handling, and two court cases set the rules.
Get a Free R&D Credit Review
Tell us about your business and a specialist from our partner network will follow up.
"*" indicates required fields
Short answer: plastics and packaging companies can claim the R&D tax credit for developing new or improved products, materials, molds and processes when the result was uncertain and engineers or technicians tested alternatives. Examples include recycled-content and compostable formulations, lightweighting, barrier films, new mold and tooling designs, and process parameter development. Qualified costs include wages, resin and materials used up in trials, and 65% of U.S. contract research. Graphics, color and shape chosen for looks are excluded as style or cosmetic factors, and normal production runs do not count even if a trial happens on the same line.
See the federal R&D tax credit for full rules, and our manufacturing R&D and chemical companies pages for related guidance.
Four-Part Test in a Plastics Plant
- Permitted purpose: better strength, barrier, weight, recyclability, cycle time or yield.
- Technological in nature: polymer chemistry, materials science and mechanical engineering.
- Uncertainty: for example, whether a bottle could drop 15% in weight and still pass top-load, or whether 50% post-consumer resin would run without defects.
- Process of experimentation: mold-flow simulation, design of experiments on temperature, pressure and cooling, trial runs, lab testing and refinement.
What Qualifies and What Usually Does Not
| Often qualifies | Usually does not qualify |
|---|---|
| Formulating new blends with recycled, bio-based or compostable content | Changing color or graphics for marketing reasons |
| Lightweighting containers while keeping strength targets | Routine color matching using known recipes |
| Developing multilayer barrier films or new coatings | Quality-control testing of production lots |
| Designing new molds, dies and tooling with uncertain performance | Repairing or duplicating an existing mold |
| Process development for new parts: cycle time, warpage, scrap reduction | Normal production runs, even on a line where trials also run |
| Package designs that must meet new shipping, shelf-life or safety tests | Shape or label changes chosen for shelf appeal alone |
Related: R&D tax credit for apparel and textile companies
Trial Runs, Molds and the Supply Rules
Only the extra supplies count. In Union Carbide Corp. v. Commissioner, 697 F.3d 104 (2d Cir. 2012), a manufacturer ran process experiments on production lines and claimed the raw materials and utilities. The Second Circuit agreed with the IRS that supplies it would have used in production anyway were not QREs. For a molder, that means claiming the resin, additives and machine time consumed by trials, not the material in saleable production output.
Molds can be supplies. In TG Missouri Corp. v. Commissioner, 133 T.C. 278 (2009), an injection molder of auto parts bought production molds from toolmakers and sold them to its customers. Because the molds were not depreciable property to TG Missouri, the Tax Court allowed their cost as research supplies. A mold you own and depreciate does not qualify as a supply. The ownership terms in your tooling agreements matter.
Pilot models. Treas. Reg. §1.174-2 includes the costs of a pilot model, a representation of a product used to evaluate and resolve uncertainty, in research and experimental expenditures. First-article and prototype parts made to test a design fit that idea. Once a design is proven and production starts, the research ends.
Custom Molders and Customer-Funded Work
Custom molders and converters often develop parts for a brand owner’s design. Under Treas. Reg. §1.41-4A(d), that research is funded if you are paid whether or not the part works, or if you keep no substantial rights to what you learn. A piece price paid only for parts that pass the customer’s specs, with trial and rework costs absorbed by you, tends to put the risk on the molder. Separately billed engineering or tooling charges paid regardless of outcome tend to make that portion funded. Keeping the right to reuse your process know-how on other jobs supports substantial rights, even when the customer owns the part design.
The Typical QRE Mix
Hypothetical QRE mix: custom injection molder
- 55% Wages: process, tooling and materials engineers, trial technicians
- 25% Supplies: resin, additives and parts consumed in trials
- 12% Molds and tooling not owned or depreciated by the company
- 8% Outside labs and U.S. contract research (65% counts)
Illustrative mix for a hypothetical company, not an industry statistic. Your mix depends on how the work is staffed.
Documentation Tips for Plastics and Packaging
- Open a trial request with the target and the open question before running a mold or line.
- Log trial settings, results and scrap counts separately from production.
- Tag trial resin and additives in inventory so their cost can be pulled.
- Keep tooling purchase orders and contracts showing who owns each mold.
- Save lab results for drop, top-load, barrier and compost tests by iteration.
Hypothetical Example: A Packaging Converter
Say a packaging company has $1,100,000 of QREs this year and $700,000, $850,000 and $950,000 in the prior three years. The average is $833,333; half of it is $416,667. QREs exceed the base by $683,333, so the ASC is $95,667, or $75,577 with the reduced-credit election at the 21% corporate rate.
Related: R&D tax credit for printing and label companies
Estimate Your Credit
Estimate your own federal credit. Enter your research wages, supplies and contractor costs:
The calculator gives a rough figure. A specialist will test each project against the four-part test before anything is filed. The ASC is used in the examples here; the Regular credit can be larger for companies with long, steady research histories.
2026 tax treatment. Under Section 174A, added by the One Big Beautiful Bill Act (P.L. 119-21), domestic research and experimental costs in tax years beginning after 2024 can be deducted in full in the year paid, or you can elect to amortize them over at least 60 months. Foreign research is still amortized over 15 years under Section 174 and never counts toward the credit. Because Section 280C(c) was restored, you either reduce your Section 174A deduction by the credit or elect the reduced credit under Section 280C(c)(2).
Related: food and beverage, machine shops, cosmetics and all R&D credit industries.
Frequently Asked Questions
Do plastics manufacturers qualify for the R&D tax credit?
Yes, for developing new or improved products, materials, molds and processes where the outcome was uncertain and tested. Routine production and quality control do not qualify.
Do trial-run materials count as supplies?
The extra resin and materials consumed in trials can count. Materials you would have used in normal production anyway do not, under Union Carbide.
Can mold costs qualify for the research credit?
They can when the mold is not depreciable property to you, as in TG Missouri, where the molder sold the molds to customers. A mold you own and depreciate is not a supply.
Does sustainable packaging development qualify?
Developing recyclable, compostable or recycled-content packaging often involves real material and process uncertainty and can qualify.
Does package graphic design count?
No. Research related to style, taste, cosmetic or seasonal design factors is excluded.
See what your business qualifies for. One free review covers cost segregation, R&D, hiring credits and benefits savings together. Call 360-641-7709 or use the button below.
Last updated November 5, 2026. This page is general information, not tax or legal advice. Confirm your situation with a qualified tax professional.
Sources
- 26 U.S.C. §41, credit for increasing research activities (Cornell LII)
- Union Carbide Corp. v. Commissioner, 697 F.3d 104 (2d Cir. 2012), opinion PDF
- The Tax Adviser: Definition of supplies clarified for the research credit (TG Missouri Corp., 133 T.C. 278)
- Treas. Reg. §1.174-2, research and experimental expenditures, including pilot models (Cornell LII)
- Treas. Reg. §1.41-2, qualified research expenses, supplies and contract research (Cornell LII)